Product description

The XTX Tungsten is built on the XTX200 platform but with a truly unique, added feature: it is protected with a hard, durable Physical Vapor Deposition (PVD) finish. This “tough as nails” finish is better than traditional chrome plating. The coating is made of high quality grades of Titanium, Zirconium and Chromium. The result not only looks extremely attractive, but protects your investment from normal diving abuse.

Features an innovative Diver Changeable Exhaust system (DCE). This system gives the diver the ability to change from a small exhaust tee to a large exhaust tee. This gives the user a choice, wider exhaust tee for minimal bubble interference (essential for underwater photography) and narrow exhaust tee for a smaller compact comfortable regulator. The regulator is supplied with both sets of exhaust tees.

An optional 5th port is available for additional hose routing. The 5th port also has with the additional bonus of an integrated heat exchanger (Tungsten, XTX200 and XTX100 first stages only).

Can be converted from a right-handed hose configuration to a left handed one. The process of changing the regulator to a left-handed configuration is both quick and simple. However, this procedure must ONLY be performed by an APEKS Authorised Service Technician.

• Available in yoke or DIN configuration.
• Braided flexi-hoses are now standard on all models. These hoses are lighter weight, more flexible and more durable.
• Suitable for coldwater use (below 10 C / 50 F).
• Compatible with EAN40 out of the box.

First Stage:

• FSR first stage
• Unique over-balanced, diaphragm design - as the diver descends, the over-balancing feature allows the medium pressure gas in the hose to increase at a rate faster than ambient. This results in superior performance at depth.
• 2 HP ports and 4 MP ports are angled for optimum hose routing.
• An environmental dry system keeps water out of the main spring chamber thus preventing ice buildup and keeping silt and contamination out.
• Also available with a DS4 Tungsten.

Second Stage

• Pneumatically-balanced second stage results in smooth, easy breathing.
• The XTX purge buttons are large and easy to operate. A 2-stage progressive purge is used - press the purge on the side for a lower flow rate, useful where more control is required such as filling lift bags etc, then press in the centre for the full effect of the purge, i.e. when regulator clearing etc.
• The large venturi lever has a soft touch rubber grip, which makes it easier to locate and use. The lever reduces the amount of grit ingress and therefore resists any possible friction giving a smooth operation.
• Easy-to-grip opening effort control knob keeps the diver in control.
• The second stage is manufactured with active protection against infection as all molded parts are produced with an additive that kills MRSA, protects against E-Coli, bacteria and fungi, and is also very effective against viruses, mold, yeast and algae.
• A silicone exhaust valve improves the breathing performance of the regulator.
• The Comfo-bite mouthpiece virtually eliminates jaw-fatigue.
• A heat exchanger (patented) which surrounds the valve mechanism, dissipates the cold caused by gas expansion while drawing in the warmth of the ambient water.

Apeks Xtx 40 octopus

The XTX40 Octopus provides the same features and performance as the XTX40 second stage and includes left / right hand reversibility. It comes with a high visibility yellow front cover and a 36” yellow hose. Suitable for cold water use (below 10 C / 50 F).

• The XTX purge buttons are large and easy to operate. A 2-stage progressive purge is used - press the purge on the side for a lower flow rate, useful where more control is required such as filling lift bags etc, then press in the centre for the full effect of the purge, i.e. when regulator clearing etc.
• Can be converted from a right-handed hose configuration to a left handed one. The process of changing the regulator to a left-handed configuration is both quick and simple. However, this procedure must ONLY be performed by an APEKS Authorised Service Technician.
• Braided flexi-hoses are now standard on all models. These hoses are lighter weight, more flexible and more durable.
• Suitable for coldwater use (below 10 C / 50 F).
• Compatible with EAN40 out of the box.

• Pneumatically-balanced second stage results in smooth, easy breathing.
• The large venturi lever has a soft touch rubber grip, which makes it easier to locate and use. The lever reduces the amount of grit ingress and therefore resists any possible friction giving a smooth operation.
• Manufactured with active protection against infection as all molded parts are produced with an additive that kills MRSA, protects against E-Coli, bacteria and fungi, and is also very effective against viruses, mould, yeast and algae.
• A silicone exhaust valve improves the breathing performance of the regulator.
• The Comfo-bite™ mouthpiece virtually eliminates jaw-fatigue.

Apeks single gauge

The Apeks submersible pressure (contents) gauge, with an internal Bourdon pressure measuring mechanism, gives you clear information on the gas contents of your cylinder. The gauge indicates the cylinder bottle pressure and the dial range is from zero to 360 Bar (an imperial version is also available with a range up to 5000 Psi). The dial face is designed with clarity in mind by being uncluttered, with large black figures on a luminous background giving a long phosphorescent effect. This makes viewing as easy as possible, even in poor visibility conditions.

FEATURES & BENEFITS

• The gauge case is made from nickel plated brass.
• The dial window is made of highly shock resistant material (anti-splinter polycarbonate).
• A specially designed housing protects the gauge and HP hose fitting from accidental damage.
• A large loop area designed into the housing allows for easy attachment.
• There is an over-pressure capsule fitted in the back of the module to prevent the screen from exploding in the unlikely event of the internal mechanism failing.

TECHNICAL SPECS

• Case material: Nickel plated brass
• Dial face: Anti-splinter polycarbonate
• Dial range: 0 - 360 Bar / 0 -5000 Psi
• Luminous background: Yes
• Over-pressure relief: Yes
• Attachment loop: Yes
• O2 compatible materials: Yes
• O2 clean: No

Apeks Regulator bag

Padded regulator bag with shoulder strap and drainage facility. Protects up to 2 regulators complete with their instrument consoles.

Please whatsapp to +60192867180 / email to [email protected]  to check stock availability  before purchase
Do you prefer buy at Shopee / Lazada please  visit  below link

https://shopee.com.my/coraldivestore

https://www.lazada.com.my/shop/coral-divestore

we also have frm 3 to 6  months instalment via Atome payment with 0 % interest .
Please take note if buyer(s)  need more infomation about products / trips / courses  ,

kindly please  email to   [email protected]   or   whatsapp to  +60192867180

For non malaysia address . we  will post by  DHL / UPS / Fdex / ARAMEX  and TNT  but buyer(s) need to pay  additonal charge for postage .we will post  worldwide  .more info please email to us .

at [email protected]  or [email protected]